MeasuringRangeinSteelPulse-EchoMode(PitFlawDetection)measuresfrom0

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：458

產品咨詢 13352927502

詳細介紹在線留言

Measuring Range in Steel

Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)

Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters)

(range depends upon probe selected)

5 year warrantyThe new CHECK-LINE TI-25M-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

Checkline TI-25M-MMX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The TI-25M-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Ability to measure through paint and eliminate coatings
Resolution of 0.001 inch (0.01 mm)
Large, backlit LCD display retains last reading
CE-Certified
Special-purpose probes are offered for a variety of applications
Switch-selected units for inches or mm
For underwater surveying, probe cable lengths up to 50 feet are optionally
RS-232 output to transfer individual data values
Includes NIST-Traceable Calibration Certificate
IP 65 Rated

Range	Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe) 0.63 to 150 millimeters (up to 500 mm if uncoated using T-102-2000 probe).To measure down to 0.025"/1.00mm, requires use of T-102-3300 Probe <="" td="">
Resolution	.001" (0.01 mm)
Display	4? - Digit, 0.5" Backlit LCD
Velocity Range	0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec
Probe	5 MHz, 0.25" Diameter (6.35 mm)
Probe Wearface	PEEK (Polyethlethylketone)
Cable	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Output	RS-232, single value when send key is pressed
Temp. Limits	Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Battery Type	Two AA batteries
Battery Life	200 hours
Weight	7 ounces (196 g)
Size	2.5 x 4.5 x 1.25" (64 x 114 x 32 mm)
Accessories Included	Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty	Gauge: 5 Years Probes: 90 Days

訂貨清單

The TI-25M-MMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

配件

TICC-M Protective Holder for Most TI Series Gauges

CF12 Coupling Fluid - 12oz

V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)

T-102-2700 1/4" diameter, 5.00 MHz, dual element, Hi-Damped transducer

T-104-9700 1/2" diameter, 3.5 MHz, dual element, Hi-Damped transducer

T-212-2001 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer

N-306-0010 6 foot RS232 Cable (DB-9 to Lemo 2 pin)

訂貨型號

TI-25M-MMX Through-Paint Ultrasonic Thickness Gauge Kit with T-102-2700 Probe

TI-25M-MMX-EXT Through-Paint Ultrasonic Thickness Gauge Kit with T-104-9700 Probe

相關型號